------------------------------------------------------------------------------------------------------------------------
IMPORTANT NOTES:
• Please thoroughly read and understand these instructions before commencing this installation.
• The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to a AN#3 fitting if desired.
• This flange kit suits Supersonic and Vee Port BOV’s
RECOMMENDATIONS
• Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician
• Turbosmart recommends that a boost gauge be permanently fitted to the vehicle
------------------------------------------------------------------------------------------------------------------------
HOW TO INSTALL YOUR BOV
Please check that the following items have been provided in your XR6 BOV Adapter Kit
Provides vacuum/pressure to BOV
Intercooler pipe replacement
Blanking plugs for standard BOV
Securing 25mm blanking plugs
2.25” – 2.50” silicone reducer
2.25” – 2.50” 45 degree silicone
reducer
1) Remove the factory manifold by removing the 3 securing screws and 4 intercooler pipe hose clamps. Remove CAM cover
breather line and the vacuum line to the OEM bypass valve.
2) Remove the OEM bypass valve from the factory manifold and blank up the hoses with the supplied 25mm blanks and clamps.
Reinstall the manifold onto the engine leaving the bottom left pipe disconnected.
Product Name: XR6 BOV Adapter
Product Description: Fits BA/BF Ford XR6 Turbo
Product Number: TS-0205-2058
Commenti su questo manuale