Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuale Utente Scaricare il pdf

------------------------------------------------------------------------------------------------------------------------

IMPORTANT NOTES:

• Please thoroughly read and understand these instructions before commencing this installation.

• The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to a AN#3 fitting if desired.

RECOMMENDATIONS

• Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician

• Turbosmart recommends that a boost gauge be permanently fitted to the vehicle

------------------------------------------------------------------------------------------------------------------------

HOW TO INSTALL YOUR BOV

Please check that the following items have been provided in your WRX STI 08 Supersonic kit.

Quantity

Description

Use

WRX STI 08 Supersonic BOV

Model Specific blow off valve

34mm Blanking plug

To blank off standard plumb back hose

½” straight hose joiner

Re-route breather hose

½” rubber hose

Breather hose

½ ” tee piece joiner

Re-route breather hose

6mm Hose clamp

To secure vacuum hose onto vacuum nipple

Gasket

To seal the BOV to the intercooler pipe

1. Remove the standard BOV from the intercooler by removing the two bolts. Disconnect the vacuum line to the top of the standard

BOV.

2. Using pliers, carefully clamp onto the spring clamp on the plumb back hose and pull the BOV off the hose. Then carefully remove

the clamp completely.

Product Name: WRX Supersonic

Product Description: Fits WRX 01 – 07, WRX STI

01 – 08, Forester XT 06’

Product Number: TS-0205-1315, TS-0205-1216

1 2 3

HOW TO INSTALL YOUR BOV 1

Sommario

Pagina 1 - HOW TO INSTALL YOUR BOV

1 ------------------------------------------------------------------------------------------------------------------------ IMPORTANT NOTES: • Pleas

Pagina 2

2 3. Fit the supplied 34mm blanking plug to the plumb back hose 4. Remove the standard hose breather 5. U

Pagina 3

3 IMPORTANT NOTES ON SETTING THE SPRING TENSION - Adjustment to the BOV is made by rotating the cap. To increase spring tension rotate in the d

Più documenti per Per l'auto Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:

Per vedere il documento Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuale Utente

Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuale Utente (4 pagine)

Commenti su questo manuale

Nessun commento

Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuale Utente

Navigare online o scaricare Manuale Utente per Per l'auto Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:. Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Subaru WRX (01-07), STi (01-08), Forester XT (06) User Manual Manuale Utente

Sommario

Più documenti per Per l'auto Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:

Commenti su questo manuale

Prodotti e manuali riguardandi Per l'auto Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: